Service kits
Service kit for screw compressor 15 kW
On quote
View
Representative photo of the series, non-contractual.
V Series — variable-speed compressors, screw compressor 15 kW
The permanent-magnet motor adjusts its speed to your air demand: it uses less power when demand drops.
Supplied without tank or dryer, to connect to your air network.
Availability to be confirmed
Pressure and colour confirmed with your order. Photo may not show the chosen colour.
Volume discounts and reseller pricing on quote.
Supplied on its own, this compressor needs a tank and a dryer to deliver stable, dry air. Here is the recommended set-up for its flow rate.
Recommended sizes are based on the flow rate at 8 bar. You can adjust everything on the order page, and we confirm the set-up before shipping.
At the heart of the machine is a high-efficiency screw air-end, driven by an IP55-protected motor (insulation class F). An electronic controller with display constantly monitors pressure, temperature and running hours, and protects the machine if anything goes wrong.
On the V Series, the permanent-magnet motor is driven by a frequency inverter: speed adapts to air demand, pressure stays stable and the machine avoids idling when demand drops.
| Power | 15 kW |
|---|---|
| Technology | Variable-speed screw compressor, permanent-magnet motor |
| Maximum pressure | 8, 10 or 13 bar, your choice |
| Air flow | 2.3 m³/min at 8 bar; 2.0 m³/min at 10 bar; 1.7 m³/min at 13 bar |
| Air receiver | No air receiver |
| Colour | Blue, black and yellow, or black and red |
| Power supply | 380 V three-phase / 50 Hz |
| Cooling | Air-cooled |
| Noise level | 68 ± 2 dB(A) |
| Outlet connection | G 3/4" |
| Dimensions | 1050 × 700 × 1000 mm (L × W × H) |
| Weight | 300 kg |
| Service intervals | 500 hours, then every 1,500 hours (reminder shown by the controller) |
| Documentation | Manual and interface in French |
| Warranty | 2 years |
Maintenance and installation
Service kits
On quote
ViewPressure gauges and accessories
On quote
ViewConnection
On quote
ViewPack: compressor + service kit + pressure gauge + connection hoses — Pack offer to be confirmed Request the pack on quote
Yes. Compression by two rotating screws is continuous: a screw compressor is designed for continuous operation, unlike a piston compressor, which needs rest periods.
The 7.5 kW 4-in-1 model includes a 420 L air receiver, a refrigerated dryer and filtration. The 5.5, 11, 15 and 22 kW models are supplied without air receiver or dryer, to be connected to your network. We can offer the complete configuration on quote.
The first service comes early, to remove running-in residues: 500 hours on the 7.5 kW 4-in-1 screw compressor. The service intervals for each model are given in its French-language manual.
Yes. The manuals, the machine interface and all the documentation for AIRSTAHL compressors are in French.
AIRSTAHL compressors come with a 2-year warranty. Spare parts remain available for 15 years, with stock in France.
7.5kW
The permanent-magnet motor adjusts its speed to your air demand: it uses less power when demand drops.
11kW
The permanent-magnet motor adjusts its speed to your air demand: it uses less power when demand drops.
Free quote, configuration advice, volume discounts.
A question? Write to us
Leave your message and we will reply quickly by e-mail. You can also write to us directly on WhatsApp.
Write on WhatsApp