Drag to rotate the machine
K Series — 4-in-1 compressors, screw compressor 15 kW
K 150Screw compressor 15 kW 4-in-1
Compressor, air receiver, refrigerated dryer and filtration combined on a single frame, at 15 kW.
- Power
- 15kW
- Maximum pressure
- 13bar
- Air flow (ISO 1217) · 8 bar
- 2.2m³/min
- Weight
- 400kg
4-in-1 version: compressor, 340 L air receiver, refrigerated dryer and filtration built in.
- 2 years warranty
- Parts for 15 years · stock in England
- CE compliance
Pressure and colour confirmed with your order. Photo may not show the chosen colour.
Volume discounts and reseller pricing on quote.
Not sure which model? Try the configurator
Description
The same compressor as the S 150, supplied as a 4-in-1: the screw air-end and its rare-earth permanent magnet motor, the air receiver, the refrigerated dryer and the filtration are mounted on one frame. One machine to set down and connect, with dry, filtered air straight out.
- Same air flow and pressures as the S 150: 8, 10 or 13 bar, your choice.
- Electronic controller with display: pressure, temperature, running hours and service reminder.
- Every machine is checked and tested before shipping.
| Power | 15 kW |
|---|---|
| Technology | 4-in-1 screw compressor, permanent magnet motor |
| Maximum pressure | 8, 10 or 13 bar, your choice |
| Air flow (ISO 1217) | 2.2 m³/min at 8 bar; 2.0 m³/min at 10 bar; 1.6 m³/min at 13 bar |
| Air receiver | 340 L |
| Drying and filtration | Built-in refrigerated dryer + filtration |
| Colour | Blue, black and yellow, or black and red |
| Power supply | 380 V three-phase / 50 Hz |
| Cooling | Air-cooled |
| Noise level | 68 to 72 ± 2 dB(A) |
| Outlet connection | G 3/4" |
| Dimensions | 1800 × 730 × 1530 mm (L × W × H) |
| Weight | 400 kg |
| Service intervals | 500 hours, then every 1,500 hours (reminder shown by the controller) |
| Oil | 10 L, Shell Corena S3 R recommended |
| Documentation | Manual and technical documentation |
| Warranty | 2 years |
Maintenance
Service parts for your compressor
First service at 500 hours, then every 1,500 hours. With the parts on hand, your K 150 is not left standing on service day.
Frequently asked questions
Can a screw compressor run all day?
Yes. Compression by two rotating screws is continuous: a screw compressor is designed for continuous operation, unlike a piston compressor, which needs rest periods.
Are your screw compressors supplied with an air receiver?
The K series 4-in-1 compressors (7.5, 11 and 15 kW) include the air receiver, refrigerated dryer and filtration. The S series stand-alone screw compressors (5.5 to 132 kW) are supplied without receiver or dryer, to be added to your network. We can quote the complete set-up.
When is the first service due?
The first service comes early, to remove running-in residues: at 500 hours, then every 1,500 hours. The machine's controller displays the reminder, and the intervals are in the manual.
Who installs and services the compressor in the UK?
Our technicians and dealers in the UK, Scotland included, install and commission AIRSTAHL compressors, carry out servicing and handle repairs. Spare parts ship from our stock in England to England, Scotland, Wales and Northern Ireland.
What is the warranty?
AIRSTAHL compressors come with a 2-year warranty. Spare parts remain available for 15 years, with stock in England.
K Series — 4-in-1 compressors
7.5kW
K 75Screw compressor 7.5 kW 4-in-1
Compressor, 420 L air receiver, refrigerated dryer and filtration combined on a single frame.
11kW
K 110Screw compressor 11 kW 4-in-1
Compressor, air receiver, refrigerated dryer and filtration combined on a single frame, at 11 kW.
K 150 — Screw compressor 15 kW 4-in-1
Free quote, configuration advice, volume discounts.