Skip to content
Delivery across the UK from our stock in England

Birmingham · West Midlands

Piston compressor hire in Birmingham

Piston compressor hire in Birmingham and the West Midlands: E series from 4 to 11 kW, installed by our UK technicians and dealers, on quote, WhatsApp 24/7.

Birmingham is full of metalworking shops, and many of them only need extra air for a while. A press shop in Tyseley sets up a temporary cell, a jeweller in the Jewellery Quarter runs a busy season, a body shop in Small Heath waits for its own compressor to be repaired. A hired piston compressor answers these needs without buying a machine.

Who is it for?

Piston compressor hire in Birmingham is aimed at:

  • machine shops and fabricators in Tyseley, Hay Mills and Aston for a temporary extra station;
  • workshops in the Jewellery Quarter for polishing and blowing off;
  • garages, body shops and truck workshops along the M6 and M42 corridors;
  • building contractors on regeneration sites around Digbeth;
  • companies that want to test a model before buying.

See also our page on compressors for body shops.

Piston or screw: which to hire?

A piston compressor is the right choice when air is needed now and then: air tools, inflation, blowing off, a few hours a day. For air that must flow all day or over several shifts, hire a screw compressor instead: see screw compressor hire in Birmingham. Our article piston vs screw compressor compares the two.

The E series for hire

Our hire fleet uses the E series piston compressors, from 4 to 11 kW with receivers from 100 to 320 L:

  • E 40: 4 kW on a 100 L receiver, ready to plug in, for the workshop and the garage.
  • E 75: 7.5 kW, 180 L receiver on wheels, 8 or 12.5 bar, 0.9 m³/min.
  • E 75 HP: two-stage, 7.5 kW, 12.5 bar, 300 L receiver, 1.05 m³/min, for truck tyre inflation and demanding tools.
  • E 110: 11 kW, 320 L receiver, 8 bar, 1.6 m³/min, for several workstations at once.

Tell us which tools you use and at what pressure: we help you pick the right model.

Installation and support in Birmingham

Installation and commissioning are carried out on site by our technicians and dealers in the UK, in Birmingham and across the West Midlands, and they also service and repair the machine while you have it. Ask us about availability and delivery to your unit: we come back quickly with a firm figure. For buying and our other services, see our page on air compressors in Birmingham.

Quote, breakdowns and WhatsApp

We hire piston compressors on quote, based on the model, the hire period and where the machine will be installed. Send your request through our quote form, or browse our whole compressor hire offer.

Has your own compressor failed? Message our WhatsApp line for industrial customers, open 24/7: every request is handled within the hour, and photos or a video with the serial number let us diagnose remotely.

Request a hire quote Request a quote

Frequently asked questions — Birmingham

Which piston compressor should I hire for a Birmingham body shop?

For spray guns and sanders used in turns, the E 75 (7.5 kW, 180 L, 8 or 12.5 bar) is a good fit. If several bays work at once, the E 110 (11 kW, 320 L, 8 bar, 1.6 m³/min) gives more flow.

Should I hire a piston or a screw compressor in Birmingham?

Hire a piston compressor for tools used now and then, a few hours a day. For air needed all day or across several shifts, choose a screw compressor: we hire those too in Birmingham, from 5.5 to 132 kW with maintenance included.

What is the price of piston compressor hire in Birmingham?

Each piston compressor hire is quoted on request, according to the model, the duration and where the machine will be installed. Use our quote form: we come back fast with a firm price.

A project, a question?

We answer quickly and quotes are free. Tell us what you run on air and we'll point you to the right model.

Request a quote