Newcastle · Tyne and Wear
Piston compressor hire in Newcastle
Piston compressor hire in Newcastle and Tyne and Wear: E series from 4 to 11 kW, installed by our UK technicians and dealers, on quote, WhatsApp 24/7.
Along the Tyne, from Walker and Wallsend to the Team Valley, many workshops need compressed air for a fixed period: an offshore contract, a quayside repair, a busy month, a compressor waiting for parts. A hired piston compressor covers that need without buying.
Who is it for?
Piston compressor hire in Newcastle is aimed at:
- fabricators and subsea engineering firms at Walker, Wallsend and Newburn Riverside;
- workshops on the Team Valley trading estate for a temporary extra station;
- fleet and vehicle workshops in Benton and around the Port of Tyne;
- garages and tyre centres across Tyneside;
- businesses that want to try a model before buying.
See also our page on compressors for soft blasting.
Piston or screw: which to hire?
Choose a piston compressor if the air is used at intervals: hand tools, tyre inflation, blowing off, a few hours a day. If the compressor has to run continuously, a screw compressor is the better fit: see our screw compressor hire in Newcastle. Our guide screw or piston compressor explains the difference.
The E series for hire
We hire out the piston compressors of the E series, from 4 to 11 kW, on receivers from 100 to 320 L:
- E 40: 4 kW on a 100 L receiver, ready to plug in, for the workshop and the garage.
- E 75: 7.5 kW, 180 L receiver on wheels, 8 or 12.5 bar, 0.9 m³/min.
- E 75 HP: two-stage, 7.5 kW, 12.5 bar, 300 L receiver, 1.05 m³/min, for truck tyre inflation and demanding tools.
- E 110: 11 kW, 320 L receiver, 8 bar, 1.6 m³/min, for several workstations at once.
We help you choose according to your tools and the pressure they need.
Installation and support in Newcastle
Installation and commissioning are carried out on site by our technicians and dealers in the UK, in Newcastle and across Tyne and Wear, and they take care of servicing and repairs during the hire. Ask us about availability and delivery to your yard: we come back fast with a firm figure. For buying and our other services, see our page on air compressors in Newcastle.
Quote, breakdowns and WhatsApp
Piston compressor hire is on quote: model, duration and installation site. To ask for one, use our quote form or see our full compressor hire offer.
If your own compressor breaks down, our WhatsApp line for industrial users is open 24/7, with every request handled within the hour: send photos or a video and the serial number for a remote diagnosis.
Frequently asked questions — Newcastle
Which piston compressor should I hire for a quayside job in Newcastle?
For grinders, impact wrenches and blow guns used through part of the day, the E 110 (11 kW, 320 L, 8 bar, 1.6 m³/min) feeds several tools. For a single crew with lighter tools, the E 75 (7.5 kW, 180 L) is enough.
When is a screw compressor better than a piston in Newcastle?
A piston compressor suits intermittent use, a few hours a day. If your compressor must run continuously, over a full day or several shifts, a screw compressor is the better choice. We also hire screw compressors in Newcastle, from 5.5 to 132 kW.
How much does it cost to hire a piston compressor in Newcastle?
Piston compressor hire is on quote, depending on the model, the hire period and the installation site in Newcastle or Tyne and Wear. Send your request through the quote form and we reply quickly with a firm figure.
The recommended models
4kW
E 40Piston compressor 4 kW
A piston compressor on its receiver, ready to plug in, for the workshop and the garage.
7.5kW
E 75Piston compressor 7.5 kW
More power for the garage's air tools.
7.5kW
E 75 HPTwo-stage piston compressor 7.5 kW, 12.5 bar
High pressure for truck tyres and demanding tools.
11kW
E 110Piston compressor 11 kW
The most powerful piston compressor in the range.
Compressor hire in other cities
A project, a question?
We answer quickly and quotes are free. Tell us what you run on air and we'll point you to the right model.