Glasgow · Scotland
Piston compressor hire in Glasgow
Piston compressor hire in Glasgow and the west of Scotland: E series from 4 to 11 kW, installed by our UK technicians and dealers, on quote, WhatsApp 24/7.
On the Clyde and across Glasgow, many workshops need compressed air for a fixed period: a marine repair at Govan, a fabrication contract in Cambuslang, a refurbishment job in the West End. A hired piston compressor gives you the air for the job without buying a machine.
Who is it for?
Piston compressor hire in Glasgow is aimed at:
- marine engineers and fabricators around Govan, Scotstoun and Shawfield;
- garages and vehicle workshops in Polmadie and Queenslie;
- maintenance teams at Hillington Park;
- building and refurbishment contractors across the city;
- businesses that want to test a model before buying.
See also our page on compressors for metal fabrication.
Piston or screw: which to hire?
Choose a piston compressor if the air is used at intervals: hand tools, tyre inflation, blowing off, a few hours a day. If the compressor has to run continuously, a screw compressor is the better fit: see our screw compressor hire in Glasgow. Our guide screw or piston compressor explains the difference.
The E series for hire
We hire out the piston compressors of the E series, from 4 to 11 kW, on receivers from 100 to 320 L:
- E 40: 4 kW on a 100 L receiver, ready to plug in, for the workshop and the garage.
- E 75: 7.5 kW, 180 L receiver on wheels, 8 or 12.5 bar, 0.9 m³/min.
- E 75 HP: two-stage, 7.5 kW, 12.5 bar, 300 L receiver, 1.05 m³/min, for truck tyre inflation and demanding tools.
- E 110: 11 kW, 320 L receiver, 8 bar, 1.6 m³/min, for several workstations at once.
We help you choose according to your tools and the pressure they need.
Installation and support in Glasgow
Installation and commissioning are done on site by our technicians and dealers in the UK, in Glasgow and across the west of Scotland, who also service and repair the machine during the hire. Ask us for availability and delivery to your site: we reply fast with a firm figure. For buying and our other services, see our page on air compressors in Glasgow.
Quote, breakdowns and WhatsApp
Piston compressor hire is on quote: model, duration and installation site. To ask for one, use our quote form or see our full compressor hire offer.
If your own compressor breaks down, our WhatsApp line for industrial users is open 24/7, with every request handled within the hour: send photos or a video and the serial number for a remote diagnosis.
Frequently asked questions — Glasgow
Which piston compressor should I hire for a fabrication job in Glasgow?
For grinders and blow guns used through part of the day, the E 110 (11 kW, 320 L, 8 bar, 1.6 m³/min) feeds several workstations. For a smaller job, the E 75 (7.5 kW, 180 L) is enough.
When is a screw compressor better than a piston in Glasgow?
A piston compressor suits intermittent use, a few hours a day. If your compressor must run continuously, over a full day or several shifts, a screw compressor is the better choice. We also hire screw compressors in Glasgow, from 5.5 to 132 kW.
How much does it cost to hire a piston compressor in Glasgow?
Piston compressor hire is on quote, depending on the model, the hire period and the installation site in Glasgow or the west of Scotland. Send your request through the quote form and we reply quickly with a firm figure.
The recommended models
4kW
E 40Piston compressor 4 kW
A piston compressor on its receiver, ready to plug in, for the workshop and the garage.
7.5kW
E 75Piston compressor 7.5 kW
More power for the garage's air tools.
7.5kW
E 75 HPTwo-stage piston compressor 7.5 kW, 12.5 bar
High pressure for truck tyres and demanding tools.
11kW
E 110Piston compressor 11 kW
The most powerful piston compressor in the range.
Compressor hire in other cities
A project, a question?
We answer quickly and quotes are free. Tell us what you run on air and we'll point you to the right model.