Coventry · West Midlands
Piston compressor hire in Coventry
Piston compressor hire in Coventry and Warwickshire: E series from 4 to 11 kW, installed by our UK technicians and dealers, on quote, WhatsApp 24/7.
In Coventry, from Whitley and Canley to Bayton Road and Binley, many workshops need compressed air for a set time: a prototype build, an extra station for a vehicle launch, a busy month in a body shop, a compressor out of service. A hired piston compressor covers that need without a purchase.
Who is it for?
Piston compressor hire in Coventry is aimed at:
- engineering and prototype workshops in Whitley, Canley and Tile Hill;
- machine shops in Foleshill, Holbrooks and on Bayton Road for a temporary extra station;
- body shops and garages along the ring road, the A45 and the A46;
- fleet workshops at logistics sites in Ryton and Baginton;
- businesses that want to test a model before buying it.
See also our page on compressors for body shops.
Piston or screw: which to hire?
Hire a piston compressor when the demand is intermittent: hand tools, tyres, blow guns, a few hours a day. When the machine must run without a break, a screw compressor is better suited: see our offer of screw compressor hire in Coventry. For more detail, read our guide screw or piston compressor.
The E series for hire
The piston compressors we hire come from the E series: 4 to 11 kW, with receivers from 100 to 320 L.
- E 40: 4 kW on a 100 L receiver, ready to plug in, for the workshop and the garage.
- E 75: 7.5 kW, 180 L receiver on wheels, 8 or 12.5 bar, 0.9 m³/min.
- E 75 HP: two-stage, 7.5 kW, 12.5 bar, 300 L receiver, 1.05 m³/min, for truck tyre inflation and demanding tools.
- E 110: 11 kW, 320 L receiver, 8 bar, 1.6 m³/min, for several workstations at once.
Not sure which one? We choose the model with you from your tools and working pressure.
Installation and support in Coventry
Our technicians and dealers in the UK install and commission the compressor on site, in Coventry and across Warwickshire, and take care of servicing and repairs while it is with you. Availability and delivery to your site are on request: we reply fast with a firm figure. For buying and our other services, see our page on air compressors in Coventry.
Quote, breakdowns and WhatsApp
Every piston compressor hire is quoted individually: the model, how long you need it and where it will run. Use our quote form to ask, or see our complete compressor hire offer.
For a breakdown on your own installation, contact our WhatsApp line for industrial users, open 24/7: each request is handled within the hour.
Frequently asked questions — Coventry
Which piston compressor should I hire for a Coventry body shop?
For spray guns and sanders, the E 75 (7.5 kW, 180 L, 8 or 12.5 bar) suits a single booth. For several bays at once, the E 110 (11 kW, 320 L, 8 bar, 1.6 m³/min) gives more flow, and the E 75 HP two-stage model covers fleet tyre work at 12.5 bar.
Piston or screw: which should I hire in Coventry?
The piston compressor is made for intermittent use. When air must flow without a break, a screw compressor is more suitable, and we also hire screw compressors from 5.5 to 132 kW in Coventry.
How is piston compressor hire priced in Coventry?
On quote: the price depends on the E series model you choose, how long you keep it and the installation site in Warwickshire. Ask through our quote form and we reply quickly with a firm figure.
The recommended models
4kW
E 40Piston compressor 4 kW
A piston compressor on its receiver, ready to plug in, for the workshop and the garage.
7.5kW
E 75Piston compressor 7.5 kW
More power for the garage's air tools.
7.5kW
E 75 HPTwo-stage piston compressor 7.5 kW, 12.5 bar
High pressure for truck tyres and demanding tools.
11kW
E 110Piston compressor 11 kW
The most powerful piston compressor in the range.
Compressor hire in other cities
A project, a question?
We answer quickly and quotes are free. Tell us what you run on air and we'll point you to the right model.