Representative photo of the series, non-contractual.
Z Series — skid-mounted compressed air stations, screw compressor 22 kW
Z 220Skid-mounted compressed air station 22 kW
Screw compressor, two receivers, refrigerated dryer, four filters and adsorption dryer, mounted and piped on a single skid.
- Power
- 22kW
- Maximum pressure
- 16bar
Complete skid-mounted station, 10 or 16 bar.
- 2 years warranty
- Parts for 15 years · stock in England
- CE compliance
Pressure and colour confirmed with your order. Photo may not show the chosen colour.
Volume discounts and reseller pricing on quote.
Description
The whole compressed air installation is mounted and piped on a single skid: set it down, connect it to 380 V and to your air network.
- Screw compressor with electronic controller monitoring pressure, temperature and running hours.
- Two vertical receivers: an air reserve that absorbs demand peaks and limits starts.
- Refrigerated dryer and four filters: water and oil are removed before the point of use.
- Modular adsorption dryer: for very dry air when a refrigerated dryer is not enough.
At 16 bar, with very dry, filtered air, this is the station for fibre laser cutting machines. The 10 bar version suits industry needing the same very dry air.
Every station is checked and tested before shipping.
| Power | 22 kW |
|---|---|
| Technology | Skid-mounted station: screw compressor, 2 vertical receivers, refrigerated dryer, 4 filters, modular adsorption dryer |
| Maximum pressure | 10 or 16 bar |
| Air flow (ISO 1217) | |
| Air receiver | 2 vertical receivers |
| Drying and filtration | Refrigerated dryer + 4 filters + modular adsorption dryer |
| Power supply | 380 V three-phase / 50 Hz |
| Cooling | |
| Noise level | |
| Outlet connection | |
| Dimensions | |
| Weight | |
| Service intervals | |
| Documentation | Manual and technical documentation |
| Warranty | 2 years |
Maintenance
Service parts for your compressor
First service at 500 hours, then every 1,500 hours. With the parts on hand, your Z 220 is not left standing on service day.
Frequently asked questions
Can a screw compressor run all day?
Yes. Compression by two rotating screws is continuous: a screw compressor is designed for continuous operation, unlike a piston compressor, which needs rest periods.
Are your screw compressors supplied with an air receiver?
The K series 4-in-1 compressors (7.5, 11 and 15 kW) include the air receiver, refrigerated dryer and filtration. The S series stand-alone screw compressors (5.5 to 132 kW) are supplied without receiver or dryer, to be added to your network. We can quote the complete set-up.
When is the first service due?
The first service comes early, to remove running-in residues: at 500 hours, then every 1,500 hours. The machine's controller displays the reminder, and the intervals are in the manual.
Who installs and services the compressor in the UK?
Our technicians and dealers in the UK, Scotland included, install and commission AIRSTAHL compressors, carry out servicing and handle repairs. Spare parts ship from our stock in England to England, Scotland, Wales and Northern Ireland.
What is the warranty?
AIRSTAHL compressors come with a 2-year warranty. Spare parts remain available for 15 years, with stock in England.
Z Series — skid-mounted compressed air stations
7.5kW
Z 75Skid-mounted compressed air station 7.5 kW
Screw compressor, two receivers, refrigerated dryer, four filters and adsorption dryer, mounted and piped on a single skid.
15kW
Z 150Skid-mounted compressed air station 15 kW
Screw compressor, two receivers, refrigerated dryer, four filters and adsorption dryer, mounted and piped on a single skid.
37kW
Z 370Skid-mounted compressed air station 37 kW
Screw compressor, two receivers, refrigerated dryer, four filters and adsorption dryer, mounted and piped on a single skid.
Z 220 — Skid-mounted compressed air station 22 kW
Free quote, configuration advice, volume discounts.