Service kits
Service kit for screw compressor 22 kW
On quote
View
Representative photo of the series, non-contractual.
L Series — 16 bar laser cutting compressors, screw compressor 22 kW
L 22016 bar all-in-one laser cutting compressor 22 kW
Compressor, 16 bar tank, dryer and fine filtration on one frame: the clean, dry air a laser cutter needs.
All-in-one version: compressor, 16 bar tank, refrigerated dryer and precision filtration built in.
On quote
- 2 years warranty
- Parts for 15 years · stock in France, près de Paris
- Delivery · Lead time to be confirmed
- CE compliance
Availability to be confirmed
Order Request a quote Download the data sheet (PDF)- User manual : coming soon
- Installation manual : coming soon
- CE declaration : coming soon
- All downloads
Volume discounts and reseller pricing on quote.
Manual, interface and documentation in French. After-sales service provided in France.
Description
At the heart of the machine is a high-efficiency screw air-end, driven by an IP55-protected motor (insulation class F). An electronic controller with display constantly monitors pressure, temperature and running hours, and protects the machine if anything goes wrong.
- Air-cooled, with an oil content in the compressed air of 3 ppm maximum at the compressor outlet.
- Standard wear parts (filters, oil, separator): maintenance stays simple and affordable.
- Every machine is checked and tested before shipping.
On the L Series, the compressor reaches 16 bar and includes a 16 bar tank, a refrigerated dryer and precision filtration (particles down to 0.01 µm, residual oil 0.001 ppm, dew point 3 to 10 °C): the air reaches the cutting head clean and dry.
| Power | 22 kW |
|---|---|
| Technology | 16 bar all-in-one screw compressor, permanent-magnet variable speed |
| Maximum pressure | 8 to 16 bar |
| Air flow | 1.8 m³/min |
| Air receiver | 500 L, 16 bar |
| Drying and filtration | Refrigerated dryer (dew point 3 to 10 °C) + precision filtration (particles 0.01 µm, oil 0.001 ppm) |
| Power supply | 380 V three-phase / 50 Hz |
| Cooling | Air-cooled |
| Noise level | 72 ± 3 dB(A) |
| Outlet connection | DN15 |
| Dimensions | 1900 × 900 × 1710 mm (L × W × H) |
| Weight | 750 kg |
| Service intervals | 500 hours, then every 1,500 hours (reminder shown by the controller) |
| Documentation | Manual and interface in French |
| Warranty | 2 years |
Maintenance and installation
Related consumables
Pressure gauges and accessories
Pressure gauge Part number to be confirmed
On quote
ViewConnection
Connection hose Part number to be confirmed
On quote
ViewPack: compressor + service kit + pressure gauge + connection hoses — Pack offer to be confirmed Request the pack on quote
Frequently asked questions
Can a screw compressor run all day?
Yes. Compression by two rotating screws is continuous: a screw compressor is designed for continuous operation, unlike a piston compressor, which needs rest periods.
Are your screw compressors supplied with an air receiver?
The 7.5 kW 4-in-1 model includes a 420 L air receiver, a refrigerated dryer and filtration. The 5.5, 11, 15 and 22 kW models are supplied without air receiver or dryer, to be connected to your network. We can offer the complete configuration on quote.
When is the first service due?
The first service comes early, to remove running-in residues: 500 hours on the 7.5 kW 4-in-1 screw compressor. The service intervals for each model are given in its French-language manual.
Are the manual and the interface in French?
Yes. The manuals, the machine interface and all the documentation for AIRSTAHL compressors are in French.
What is the warranty?
AIRSTAHL compressors come with a 2-year warranty. Spare parts remain available for 15 years, with stock in France.
L Series — 16 bar laser cutting compressors
11kW
Screw compressor
L 11016 bar all-in-one laser cutting compressor 11 kW
Compressor, 16 bar tank, dryer and fine filtration on one frame: the clean, dry air a laser cutter needs.
On quote
View
15kW
Screw compressor
L 15016 bar all-in-one laser cutting compressor 15 kW
Compressor, 16 bar tank, dryer and fine filtration on one frame: the clean, dry air a laser cutter needs.
On quote
View L 220 — 16 bar all-in-one laser cutting compressor 22 kW
Free quote, configuration advice, volume discounts.